|
Post by niksan29 on Mar 30, 2015 11:42:47 GMT
please tell me how to make all the changes World Navaids package in ftx global vector (v.1.20)? without these changes I have is offset runways, fmc airac 1503 +/- 1 ... This is for but that higher priority vector .. But if you put less than the vector does not work correctly ... so I would like to see these changes(World Navaids package )introduced directly into a vector.
|
|
|
Post by Herve Sors on Mar 30, 2015 14:01:23 GMT
Sorry Niksan. I don't know and doesn't use "ftx global vector". May be they have a support site for the navdata they provide ? My World Navaids package only update the default FS Sceneries. If those are not anymore active due to higher scenery priority of other addons, there's nothing I can do
Regards
Hervé
|
|
|
Post by niksan29 on Apr 5, 2015 10:37:44 GMT
very sorry that is not in use, ftx vector great addition. tell me how it is possible to manually renumber the runways?
|
|
|
Post by Herve Sors on Apr 5, 2015 11:15:43 GMT
Manually is probably a bit tricky considering the numerous data that have to be changed (not only rwy marks but also associated ILS, taxiway signs, approach data ans some indexes) My ILS Inspector and Editor software provides such a facility and will do all the necessary changes (although I didn't test it on all 3rd party BGLs, it should work without problem) After you have selected your Sim version and BGL file (or folder containing it), use the Airport/Rwy editor menu A backup of the original file will be done. So don't worry
Regards
Hervé
|
|
|
Post by niksan29 on Jun 8, 2015 18:50:51 GMT
It would be just fine if you added support FTX Global Vector! www.fullterrain.com/product/ftxgvector This is a very useful mod ! Unfortunately, there is FSXP3DNavaids installer finds a lot of conflicts ... The file Conficts.txt can be downloaded here: dropmefiles.com/XmjaD . Maybe how you can make changes to these files? I can send them to you , thank you!
|
|
|
Post by Herve Sors on Jun 9, 2015 7:29:16 GMT
Hello Niksan
I do not own ORBX FTX Global and will certainly not patch their airport files considering it's a 3rd party payware I presume those who buy the software can ask the editor to correct what there is to correct (they certainly have a forum). Sometimes, they listen ;-) Until then, and as said above, it is not too complicated to use my ILS Inspector and Editor to patch the data you use on a regular basis. At least you could give it a try
Regards
Hervé
|
|
|
Post by niksan29 on Jun 9, 2015 15:17:45 GMT
Unfortunately I can not use the utility ILS Inspector... I tried to change the runway at the airport EBBR with the numbering 02 and 20 on the right 01 and 19 but was unable to do so ... All the same, I hope that when you are going to use the vector .... You are a pro in navigate you to make these changes it would be much easier. Anyway, thank you for the work Attachments:
|
|
|
Post by Herve Sors on Jun 9, 2015 15:44:07 GMT
>>I tried to change the runway at the airport EBBR with the numbering 02 and 20 on the right 01 and 19 but was unable to do so ...<< Seems you didn't proceed the right way because there's no reason you couldn't After selecting the bgl file..select the menu Airport/Rwy Editor then Runway Id Editor..enter in the editor box: EBBR, 02 as Sim Runway identifier, 01 as new runway identifier then click on change Id. That's all. If "unable" to do this operation, let me know precisely where the problem is
Regards
Hervé
|
|
|
Post by niksan29 on Jun 10, 2015 7:04:06 GMT
Thank you, I got to change that! But as you can see I have a lot of conflict ... it changes every very long By the way and how to correct the offset of the runway 30 USTR. In fact, the plane is exactly in the center of the runway...
|
|
|
Post by Herve Sors on Jun 10, 2015 7:46:27 GMT
Yes you will have to patch all runways for which you wish to change Ids..fortunately, there's not so many I presume your 2nd question refers to the "start" position (I don't know what you mean by "offset"). On your picture it does not seem to be wrong. If I didn't interpret your question correctly, please clarify
|
|
|
Post by niksan29 on Jun 12, 2015 17:56:27 GMT
I presume your 2nd question refers to the "start" position (I don't know what you mean by "offset"). The plane is not in the center of the runway , the aircraft is located slightly to the right on the runway at the start... (I selected this red circle)
|
|
|
Post by Herve Sors on Jun 12, 2015 22:30:41 GMT
>>The plane is not in the center of the runway , the aircraft is located slightly to the right on the runway at the start<< I do not change any start position in the updates I provide. Anyway in your case, this start position comes from your addon airport. Note it is very common those start positions are a bit on the left or right of CL but heading is usually OK.
|
|
|
Post by niksan29 on Jun 15, 2015 17:26:55 GMT
I disabled all add-ons but I still have a problem ... 1 ) The airport URKK is not the correct designation of the runway, in the FMC(airac 1505v2) has a runway 5C and 5L. and map the runway 5L and 5R,why can this be? 2 ) At the airport URSS, there is no system ILS, in reality it is there?
|
|
|
Post by Herve Sors on Jun 15, 2015 18:52:03 GMT
I presume you didn't install the "Russia" ILS/Rwy regional update in addition to the World Navaids package. Did you? Because - as indicated in the documentation - the latest only corrects ILS/RWYs in the Europe area (see coverage map)
-H
|
|
|
Post by niksan29 on Jun 16, 2015 11:32:02 GMT
I installed the "Russia" ILS / Rwy regional but unfortunately it did not help; (
|
|