Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 23, 2018 14:57:02 GMT
Dear Herve, I want to change the ILS for runway 28 at EDDN due to wrong assignment. In P3DV4, INUY is assigned for ILS runway 28, which is wrong because of only LOC with no GS. The correct ILS must be INUW for this runway. I have tried several times to change from INUY to INUW, but I get the attached failure messages: Deleting INUY is possible, but even if so, selection of INUW is not possible. Is there a chance to get this fixed, please? Thank you Hans
|
|
|
Post by Herve Sors on Apr 23, 2018 15:49:55 GMT
EDDN Rwy 28 is a special case since there's 2 localizers for the same runway - INUW ILSDME cat III (109.1) - INUY LOC only (111.75) Of course you cannot simply rename INUY as INUW if this last one already exists (seems to be the case considering the message you have) Assignment on Rwy page is not so important but can be changed (will be explained later on) You didn't provide me a screenshot of the NavData/Display ILS Data so as to confirm both Navaids are already present..may be you could do that Also it could be interesting to know if you want to keep both Navaids (possible) or not 1) If you want to have both: first delete all data for rwy 28 and recreate first INUY then INUW (considering there's 2 sets of data in AIRAC database you'll have to fill in the ILS identifier for gaining access to AIRAC data) 2) If you just want to have INUW, do the same but only recreate INUW If you're not at ease with the process just send me the BGL file (default is APX50140.bgl) and I'll do that for you Note that data have already been properly corrected in the navaid updates I provide..although BGL assignment is indeed INUE (and not INUW). I will correct that on next release (the only way for correcting that if to delete both ILSs and recreating them. Assignment will be set to the LATEST created ILS
Regards
Hervé
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 24, 2018 6:25:18 GMT
Good morning Hervé, thanks for your fast reply. Attached the screenshot of the ILS data. I want to have both, but INUW dedicated for ILS runway 28. I have attached also the BGL file and want to take the chance to get it back corrected by your help. Thanks a lot for this! Regards Hans Attachments:
APX50140.bgl (351.18 KB)
|
|
|
Post by Herve Sors on Apr 24, 2018 7:26:59 GMT
Hello Hans,
Will do that for you. However expect some delay (a few days at most) since I'm presently on vacation and far from my main computer. Will be back home on May 29th
Regards
Hervé
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 24, 2018 8:29:01 GMT
No hurry. I appreciate your help very much.
|
|
|
Post by Herve Sors on Apr 30, 2018 13:37:01 GMT
Hello Hans
Please update AIE to v1.45. You should now be able to do the change. For updating rwy assignment to INUW, just edit INUW ILS28 and click on commit change (without making any change to ILS data..). AIE will propose you to update rwy assignment. Accept it and it should be OK
Hervé
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 2, 2018 5:13:43 GMT
Hello Hervé,
now it's working. Thank you very much for your help.
Hans
|
|