Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 9, 2020 12:07:41 GMT
Hello Herve: I am running v1.3 of Simple flight plan maker. Two things: 1. I generated a .PLN file for P3D v4.3.29.25520 and the plan was not visible in the Prepar3D Load Flight Plan listing (.PLN files created by P3D and FSUIPC are present). Comparing the generated .PLN with existing files, it was clear the simple .PLN generated XML did not finish with: </FlightPlan.FlightPlan> </SimBase.Document> I added those lines and the plan is now visible to select in the editor. Sounds like a bug. 2 .The other problem is, that while I set 23000 ft as the flight level in Simple flight plan maker, that altitude was set to 3000 ft in the Prepar3D dialog. I cannot change the flight level and save in Prepar3D as it removes real world waypoints in the route as Prepar3D doesn't seem to recognize them. The plan is CYBK ONDOS URPOX CYRT. Is it possible Prepar3D is truncating the altitude string? Or perhaps doesn't recognize it? The generated .PLN is attached: CYBK-CYRT.pln (2.06 KB) Thanks... Pilatus57
|
|
|
Post by Herve Sors on May 9, 2020 12:35:39 GMT
Hello Pilatus57,
Thanks for the report. Will investigate and come back to you here quickly
Hervé
|
|
|
Post by Herve Sors on May 9, 2020 12:55:05 GMT
I entered the flight plan you described and below is what I generated I see the following part in the file you send that indicates you do not use Version 1.30 as mentioned Could you please check
<AppVersion> <AppVersionMajor>4</AppVersionMajor> <AppVersionBuild>29</AppVersionBuild> </AppVersion>
The </FlightPlan.FlightPlan> and </SimBase.Document> are correctly set in v1.30 I've no answer regarding altitude but loading the "correct" generated flight plan in FSX doesn't result in any altitude "truncation"
****Generated pln with version 1.30****
<?xml version="1.0" encoding="UTF-8"?>
<SimBase.Document Type="AceXML" version="1,0"> <Descr> AceXML Document </Descr> <FlightPlan.FlightPlan> <Title>CYBK to CYRT</Title> <FPType>IFR</FPType> <CruisingAlt>23000</CruisingAlt> <DepartureID>CYBK</DepartureID> <DepartureLLA>N64° 18' 14.66",W96° 4' 54.06",+000059.00</DepartureLLA> <DestinationID>CYRT</DestinationID> <DestinationLLA>N62° 48' 56.30",W92° 7' 41.35",+000094.00</DestinationLLA> <Descr>CYBK to CYRT</Descr> <DeparturePosition>16</DeparturePosition> <DepartureName>Baker Lake</DepartureName> <DestinationName>Rankin Inlet</DestinationName> <AppVersion> <AppVersionMajor>10</AppVersionMajor> <AppVersionBuild>61637</AppVersionBuild> </AppVersion> <ATCWaypoint id="CYBK"> <ATCWaypointType>Airport</ATCWaypointType> <WorldPosition>N64° 18' 14.66",W96° 4' 54.06",+000059.00</WorldPosition> <ICAO> <ICAOIdent>CYBK</ICAOIdent> </ICAO> </ATCWaypoint> <ATCWaypoint id="ONDOS"> <ATCWaypointType>Intersection</ATCWaypointType> <WorldPosition>N62° 55' 41.13",W92° 26' 10.06",+000000.00</WorldPosition> <ICAO> <ICAORegion>CY</ICAORegion> <ICAOIdent>ONDOS</ICAOIdent> </ICAO> </ATCWaypoint> <ATCWaypoint id="URPOX"> <ATCWaypointType>Intersection</ATCWaypointType> <WorldPosition>N62° 51' 57.29",W92° 15' 55.13",+000000.00</WorldPosition> <ICAO> <ICAORegion>CY</ICAORegion> <ICAOIdent>URPOX</ICAOIdent> </ICAO> </ATCWaypoint> <ATCWaypoint id="CYRT"> <ATCWaypointType>Airport</ATCWaypointType> <WorldPosition>N62° 48' 56.30",W92° 7' 41.35",+000094.00</WorldPosition> <ICAO> <ICAOIdent>CYRT</ICAOIdent> </ICAO> </ATCWaypoint> </FlightPlan.FlightPlan> </SimBase.Document>
|
|